portafolio

1×19 AISI316 stainless steel strand is a very popular stainless steel construction. Used heavily throughout the marine industry, 1×19’s excellent breaking load and low stretch characteristics along with its’ aesthetic appeal make it a favourite for marine, structural and balustrade applications as well as many others, examples of which are shown below: Applications Balustrades Standing

7×7 AISI316 stainless steel wire rope is used for a wide range of applications. More flexible than 1×19 but more rigid than 7×19, the 7×7 construction is often used where 1×19 lacks enough flexibility for an application or where 7×19’s weaker breaking load is too low for an application. Used extensively throughout the marine industry

6×36 is the most flexible of our stainless steel wire ropes. Available in much larger diameters, 6×36 stainless steel wire ropes are often used for larger diameter stainless steel slings as well as for general engineering applications. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the

1X19 AISI316 stainless steel strand is a very popular stainless steel construction. Used heavily throughout the marine industry, 1X19’s excellent breaking load and low stretch characteristics along with its aesthetic appeal makes it a favourite for marine, structural and balustrade applications as well as many others, examples of which are shown below: Applications Balustrades Standing

18X7 AISI316 stainless steel wire rope is a non-rotating construction used where low rotation is required. Popular applications include davit and crane rope applications. Available in diameters from 1.5mm through to 16mm. Applications Marine crane rope applications Marine/Saltwater environment Sewage treatment works Wire rope slings Davit ropes Breaking Loads Nominal Diameter Approximate Mass Minimum breaking

Material:High-tensile stainless steel wire (inox) 1.4401 (AiSi 316) to DIN EN 10264-4(1.4436, 1.4462 on request) Modulus of Elasticity:130 kN/mm² ± 10 kN/mm² Tolerance on Diameter:0% / +3% Corrosion Protection:Stainless Steel (inox), no blocking compound Socketing:d=6-36mm: Swaging to German Technical Approval Z-14.7-431d=40-135mm: Spelter to DIN EN 13411-4 with Resin (e.g. WiRElocK®) Breaking Loads Nominal Diameter Minimum