Beschrijving.
Material High-tensile stainless steel wire (inox) 1.4401 (AiSi 316) to DIN EN 10264-4 (1.4436, 1.4462 on request) Modulus of Elasticity 130 kN/mm² ± 10 kN/mm² Tolerance on Diameter 0% / +3% Socketing Spelter to DIN EN 13411-4 with Resin (e.g. WiRElocK®) Corrosion Protection Stainless Steel (inox), no blocking compound Breaking Loads Nominal Diameter Minimum Breaking […]
Roestvrij volledig vergrendelde spiraalkabels (FLC) Lees verder »
1×19 galvanised steel strand is a very poplar construction. 1×19’s excellent breaking load and low stretch characteristics along with its’ aesthetic appeal make it a favourite for small diameter applications, examples of which are shown below: Applications General engineering applications Small diameter wire rope slings Stay wires Fencing rope Catenary wire Garage door cables
6×7 construction general purpose wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a WSC the rope is more commonly referred to as 7×7. The rope is very popular in smaller diameters from 0.5mm to 2mm where the cable remains very flexible. 6×7 ropes become quite rigid
Product Details 6×7 construction general purpose wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a WSC the rope is more commonly referred to as 7×7. The rope is very popular in smaller diameters from 0.5mm to 2mm where the cable remains very flexible. 6×7 ropes
19X7 (6/1) – Rotation Resistant Product Details This wire rope construction is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 17X7, 18X7 and 19X7. For further flexibility and other performance characteristics we also supply 32X7, 35X7 and 37X7. Depending upon your requirement for higher breaking
19X7 (6/1) – Gegalvaniseerd, rotatiebestendig staaldraad Lees verder »
19X7 (6/1) Compacted – Non Rotating Product Details This compacted wire rope construction is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 17X7, 18X7 and 19X7. For further flexibility and other performance characteristics we also supply 32X7, 35X7 and 37X7. Applications Offshore crane rope Deck crane
19X7 (6/1) verdicht – niet-roterende staalkabel Lees verder »
Product Details 32X7 is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes: 34X7, 35X7 and 37X7. Depending upon your requirement for higher breaking load or better wear characteristics, these wire ropes are available in different finishes and lubrications, as well as being available with plastic impregnated.
32X7 (6/1) – Rotatiebestendig gegalvaniseerd staaldraad Lees verder »
Product Details LKSTK17 features – due to its structure – optimum all-round characteristics combined with extremely high breaking forces. LKSTK17 was designed specific ally for use in challenging multilayer spooling conditions, especially also for small drum diameters. MULTILAYER SPOOLING SUPERFILL® PLASTFILL® Specifications 16 x K7-PIWRC (K), RCN 23-2 Lang‘s lay (also available as ordinary lay rope), right
Product Details Rotation is a thing of the past, the future is LKSPTK15. Check out this ideal combination of exceptional torsional stability and high breaking forces, long service life and optimum winding behavior. Rotation resistant. Cost-effective. Safe. MULTILAYER SPOOLING SUPERFILL® PLASTFILL® Specifications 16 x 7 – IWRC (K), RCN 23-2 Ordinary lay or lang’s lay, right or
Product Details Extreme resistance to negative external influences distinguish this rope from others. SUPERFILL® compaction technology developed by LKS provides high breaking forces and highest safety in use. Compaction in the core and a PLASTFILL® insert result into stability against lateral pressures. MULTILAYER SPOOLINGSUPERFILL®PLASTFILL® Specifications 10 – 42mm: 8 x K26WS – EPIWRC (K), RCN 09
Product Details 6-strand ordinary lay rope, suited for use as a trolley or mounting rope. MULTILAYER SPOOLINGSUPERFILL® PLASTFILL® Specifications 6 x 19S – IWRC, RCN 02 Ordinary lay with steel core, right or left lay Use without rope swivel Tower Crane Breaking Loads Nominal Diameter Weight Minimum Breaking Loads 1960 Mpa [mm] [inch] [kg/m] [kN] [Kg] 6.5
Product Details This compacted wire rope construction is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 17X7, 18X7 and 19X7. For further flexibility and other performance characteristics we also supply 32X7, 35X7 and 37X7. Applications Offshore crane rope Deck crane rope Pillar crane rope Whip
19X7 (6/1) gestuikte staalkabel – niet roterend Lees verder »
Dutch 
English 
Spanish 
French 
German 
Italian 
Japanese 
Korean 
Arabic 
Russian 
Greek 
Croatian 
Dutch (Formal) 
Portuguese 
Urdu 
Czech 
Armenian 
Thai 
Romanian