This 4,000 Tonne Down Stroke Press sets itself apart thanks to its very good accessibility and the piston located on top. This means that the workpiece remains in position during swaging and is particularly simple to finish.
- Suitable for the following ferrules
- Aluminium ferrules up to Z 94
- Flemish Eye ferrules up to 6″
|Max. pressure capacity||40000||kN|
|Max. piston stroke||260||mm|
|Max. oil pressure||approx. 525||bar|
|Loaded press speed up to approx. 10.000 KN||5||mm/s|
|Loaded press speed up to approx. 40.000 KN||0.45||mm/s|
|Measurements of swaging dies||380 x 300||(W x H) mm|
|With angle packings||300 x 250 or 250 x 200||(W x H) mm|
|Power supply||55,0 kW / 400 V / 3 50 Hz||kW / V / Hz|
|Stroke limit||smooth, electronic control||Quality / Type|
|Dimensions||2.000 x 3.800 x 3.600||(L x W x H) mm|
|Press Body weight||32.000||kg|
|Oil capacity||approx. 2000||L|
Cutting-edge technology from Germany, tested for decades under extreme conditions.
Constructed from high quality components, specially fabricated to our standards from leading manufacturers, ensuring that your machine is ready for use at all times.
Easy to Use
It is particularly easy to operate since the ferrule is pressed from the top and the work piece does not move vertically with the piston. The controls are located at the right spot and you can operate them intuitively. Documentation and signage are provided.
These presses comply with the current valid EU Machinery Directive 2006/42/EC and are manufactured according to ISO9001.
High Speed / Performance
This press stands apart thanks to their high engine performance and thus high press speeds. At low pressure, press speed is the maximum permissible 6 mm/s.