Four-Leg Bridle Mechanically Spliced 4 legs Wire Rope Slings Reliable to the core

4 Legs Bridle Wire Rope Lifting Slings are constructed of four wire rope assemblies that are attached to an Oblong Ring . The lifting ends of the wire rope legs can be fitted with a variety of hooks, eyes, or rings to allow attachment to nearly any object. 4 Leg Bridle Wire Rope Slings are designed for balanced or unbalanced loads and for heavy lifts when the weight can easily be distributed over four points . Wire Rope Slings are constructed of strong, high quality steel that is resistant to corrosion, heat, sunlight and most chemicals.  4-Leg Wire Rope slings are custom built to meet your specific needs for any application . 

Technical 

* Rated Capacities Basket Hitch based on D/d ratio of 25.
** Working Load Limit.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Sling angles less than 30° shall not be used.
Sling angles in this catalog depart from the traditional method of vertical angles measured at the sling hook. It has long been the opinion of sling users that it is easier to measure a sling angle relative to the ground or horizontal. The method is the same whichever angle is used. When the horizontal angle is used you, must use the trigonometric cosine of the vertical angle.

Choose wire rope slings by diameter based on capacity ratings. 

Four leg wire rope sling is comprised of four lengths of wire rope that are connected at the top with a single oblong master link, resulting in a design that provides excellent load balance and control. Also known in the industry as 4 leg bridle wire rope slings or simply 4 leg cable slings, they are traditionally made with latched eye hooks at the end of each rope length, but each leg can be customized with different hardware as needed. We’ve added thimbles to the “eyes” or loops that connect the lengths to the oblong, to offer protection at the point of contact, thereby extending the life of the sling. All of our four leg wire rope slings feature a flemish eye splice and carbon steel sleeve, for superior use of rope capacity.

Rated capacities of 4 leg wire rope slings will vary widely based on the angle/direction of the pull in the lift. The type of wire rope will also vary its uses and capacities. We offer 4 leg wire slings in both a 6×19 EIPS configuration and a 6×36 EIPS configuration; all feature an Independent Wire Rope Core (IWRC) for resistance, even in harsh environments.

How to calculate the length of a wire rope sling

Wire rope bridles are measured by the length of the sling leg plus the end hook. The length of the oblong master should not be included in the overall measurement.

Our slings are available in a variety of lengths, but can also be customized to any length you need. Give our sales team a call for more information or to place a custom order.

Sling Proof Testing Certificates

Proof testing certificates can be supplied with your order for a nominal fee and must be requested at the time of order. Proof tests are performed in the factory where the sling is pull tested to 2x the vertical rating and officially recorded as proof for governing bodies. During the standard manufacturing process, only random slings during a production run are tested for compliance; in order to provide proof testing certificates with your order, every sling must be pull tested at the time of manufacture.4-Leg Bridle Wire Rope Lifting Slings are constructed of four wire rope assemblies that are attached to an Oblong Ring . The lifting ends of the wire rope legs can be fitted with a variety of hooks, eyes, or rings to allow attachment to nearly any object. 4 Leg Bridle Wire Rope Slings are designed for balanced or unbalanced loads and for heavy lifts when the weight can easily be distributed over four points . Wire Rope Slings are constructed of strong, high quality steel that is resistant to corrosion, heat, sunlight and most chemicals.  4-Leg Wire Rope slings are custom built to meet your specific needs for any application .