Portfólio

Descrição.

Cordas de bobina de aço inoxidável totalmente travadas

Cordas de bobina totalmente travadas em aço inoxidável (FLC)

Material High-tensile stainless steel wire (inox) 1.4401 (AiSi 316) to DIN EN 10264-4 (1.4436, 1.4462 on request) Modulus of Elasticity 130 kN/mm² ± 10 kN/mm² Tolerance on Diameter 0% / +3% Socketing Spelter to DIN EN 13411-4 with Resin (e.g. WiRElocK®) Corrosion Protection Stainless Steel (inox), no blocking compound Breaking Loads Nominal Diameter Minimum Breaking […]

Cordas de bobina totalmente travadas em aço inoxidável (FLC) Leia mais »

1x19 cabo de aço

1×19 (12/6/1) – Cabo de aço

  1×19 galvanised steel strand is a very poplar construction. 1×19’s excellent breaking load and low stretch characteristics along with its’ aesthetic appeal make it a favourite for small diameter applications, examples of which are shown below: Applications General engineering applications Small diameter wire rope slings Stay wires Fencing rope Catenary wire Garage door cables

1×19 (12/6/1) – Cabo de aço Leia mais »

19X7 (6/1) - Cabo de aço resistente à rotação galvanizado

19X7 (6/1) - Cabo de aço resistente à rotação galvanizado

19X7 (6/1) – Rotation Resistant   Product Details This wire rope construction is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 17X7, 18X7 and 19X7. For further flexibility and other performance characteristics we also supply 32X7, 35X7 and 37X7. Depending upon your requirement for higher breaking

19X7 (6/1) - Cabo de aço resistente à rotação galvanizado Leia mais »

Cabo de aço estampado 19X7 (6/1) - Não giratório

19X7 (6/1) Compactado - Cabo de aço não rotativo

19X7 (6/1) Compacted – Non Rotating Product Details This compacted wire rope construction is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 17X7, 18X7 and 19X7. For further flexibility and other performance characteristics we also supply 32X7, 35X7 and 37X7. Applications Offshore crane rope Deck crane

19X7 (6/1) Compactado - Cabo de aço não rotativo Leia mais »

32X7 (6/1) - Cabo de aço galvanizado resistente à rotação

32X7 (6/1) - Cabo de aço galvanizado resistente à rotação

Product Details 32X7 is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes: 34X7, 35X7 and 37X7. Depending upon your requirement for higher breaking load or better wear characteristics, these wire ropes are available in different finishes and lubrications, as well as being available with plastic impregnated.

32X7 (6/1) - Cabo de aço galvanizado resistente à rotação Leia mais »

Cabos de aço LKSTK17 para guindastes de torre

Cabos de aço LKSTK17 para guindastes de torre

Product Details LKSTK17 features – due to its structure – optimum all-round characteristics combined with extremely high breaking forces. LKSTK17 was designed specific ally for use in challenging multilayer spooling conditions, especially also for small drum diameters. MULTILAYER SPOOLING SUPERFILL® PLASTFILL® Specifications 16 x K7-PIWRC (K), RCN 23-2 Lang‘s lay (also available as ordinary lay rope), right

Cabos de aço LKSTK17 para guindastes de torre Leia mais »

Cabo de aço do guindaste LKSPTK15

Cabo de aço do guindaste LKSPTK15

Product Details Rotation is a thing of the past, the future is LKSPTK15. Check out this ideal combination of exceptional torsional stability and high breaking forces, long service life and optimum winding behavior. Rotation resistant. Cost-effective. Safe. MULTILAYER SPOOLING SUPERFILL® PLASTFILL® Specifications 16 x 7 – IWRC (K), RCN 23-2 Ordinary lay or lang’s lay, right or

Cabo de aço do guindaste LKSPTK15 Leia mais »

Cabos de aço QS 816 V para guindastes de torre

Cabos de aço QS 816 V para guindastes de torre

Product Details Extreme resistance to negative external influences distinguish this rope from others. SUPERFILL® compaction technology developed by LKS provides high breaking forces and highest safety in use. Compaction in the core and a PLASTFILL® insert result into stability against lateral pressures. MULTILAYER SPOOLINGSUPERFILL®PLASTFILL® Specifications 10 – 42mm: 8 x K26WS – EPIWRC (K), RCN 09

Cabos de aço QS 816 V para guindastes de torre Leia mais »

pt_BRPortuguese
Role para cima