7×19 (12/6/1) – Wire Strand Core Galvanized Steel Wire Rope

7×19 (12/6/1) – Wire Strand Core Galvanized Steel Wire Rope

6×19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7×19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6×19 FC and 6×19 WSC (7×19) is very flexible in diameters 3mm to 6mm and is used for many requirements where wire ropes are running over pulleys. 7×19 construction is readily available in both galvanised and marine grade stainless steel.

  • Applications
  • Where cables are required to run over pulleys
  • General engineering applications
  • Industrial door cables
  • Garage door cables
  • Control cables
  • Gym equipment cables
  • Wire rope slings
  • Wind turbine
  • Whip checks
  • Winch ropes
 
 
 
 
 
 
 
Breaking Loads
Nominal Diameter Approximate Mass Minimum Breaking Loads
1770 Mpa
[mm] [kg/m] [kN] [Kg]
3
0.034 5.77 588
4
0.061 10.25 1,045
5
0.095 16.02 1,633
6
0.137 23.07 2,352
7
0.187 31.40 3,202
8
0.244 41.01 4,182
9
0.309 51.90 5,293
10
0.381 64.07 6,535
11
0.461 77.53 7,908
12
0.549 92.27 9,411
13
0.644 108.29 11,045
14
0.747 125.59 12,809
16
0.975 164.03 16,731
18
1.234 207.60 21,175
20
1.524 256.30 26,142

en_USEnglish
滚动至顶部