LKS high performance wire ropes in “The world’s first crane” in 2019 show best of best

At the beginning of 2019,LKS High performance Wire Ropes used in the lifting of “The world’s first crane”, the construction and installation site of the largest equipment (ethylene 2 propylene tower) of China Science and technology refining and chemical integration project, “the world’s first crane” challenges the hoisting of 1000 ton ethylene 2 propylene tower with the largest volume, the highest height, the largest hoisting difficulty and the highest hoisting requirements of the island refining and chemical project.

XCMG xgc88000 4000t crawler crane and 1250t crawler crane have double tail sliding. The main crane 4000t crawler crane adopts 102 main boom + 33m fixed auxiliary boom working condition, and the working radius is 34m. The ethylene 2 propylene tower with a diameter of 6.804m was successfully installed in place. The erection height is 108.6m, and the main hoisting weight is 1435t

On March 15, 2019, the “fattest” large tower of China Science and technology refinery project, the quench oil tower of 800000t / a ethylene steam cracking unit, was successfully hoisted and fixed.

On April 4, 2019, in less than 3 hours, the large ethylene tower with a height of 100 meters, a diameter of 5.2 meters and a weight of 800 tons in the ethylene refining plant of China Science and Technology Corporation jumped up in the air and stably hoisted in place.

On June 20, 2019, XCMG xgc88000 crawler crane, the “Big Mac” combined with 500t crawler crane, successfully hoisted the absorption tower of coal to hydrogen plant, a large-scale refining equipment of China Science and Technology Corporation. The lifting equipment is the first high tower of the coal to hydrogen plant and the key core equipment of the plant, with a diameter of 4.8m, a height of about 90m and a total lifting weight of more than 800 tons.LKS High performance Wire Ropes is used for lifting.

For sure XGC 88000 crawler crane is the big guys in the lifting engineering, there is the most important we should take care is the crane wire rope,LKS specially manufactures Wire Rope for XGC 88000.Then we can see this big guy to lifting the products easily and safety.

What should be paid attention to in the use of High performance Wire Ropes?

First of all, no matter what type of High performance Wire Ropes, pay attention to the lubrication effect; if the crane wire rope is not lubricated in place and the grease cannot effectively penetrate into the wire rope strand, the wire rope will cause early wire breakage, especially the internal core after long-term wear and corrosion.

Second, the steel wire rope of the crane should pay attention to the kink phenomenon. If the special steel wire rope of the crane, such as 35W * 7 / 4V * 39s + 5FC, is not installed in place, there will be stress phenomenon at the beginning of the installation. Then the High performance Wire Ropes without rotation will also kink during the lifting of heavy objects, and some steel wire ropes will bite on the rope arranging drum.

So what if the Wire Ropes head of the truck crane is treated? When installing a new steel wire rope for the crane, the two ends of the new rope shall be tied tightly with thin soft wires to prevent loose ends and strands.

So how to eliminate the kink and undercut of wire rope? In general, when the new wire rope is uncoiled, we should keep the High performance Wire Ropes in a horizontal and natural state, so as to eliminate the stress, so as to avoid the kink phenomenon and extend the service life of the wire rope when replacing the wire rope.

What is wire rope specifications construction?

Product Parameter