6×19 (12/6/1) – Fibre Core Galvanized Steel Wire Rope

This 6×19 compacted wire rope construction is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7×19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6×19 FC and 6×19 WSC (7×19) is very flexible in diameters 3mm to 6mm and is used for many applications where wire ropes are running over pulleys. 7×19 construction is readily available in both galvanised and marine grade stainless steel.

  • Applications
  • Where cables are required to run over pulleys
  • General engineering applications
  • Industrial door cables
  • Garage door cables
  • Control cables
  • Gym equipment cables
  • Wire rope slings
  • Wind turbine
  • Whip checks
  • Winch ropes
 
 
 
 
 
 
 
Breaking Loads
Nominal Diameter Approximate Mass Minimum Breaking Loads
1770 Mpa 1960 Mpa
[mm] [kg/m] [kN] [Kg] [kN] [Kg]
3
0.031 4.9 498 5.4 552
4
0.055 8.7 886 9.6 982
5
0.087 13.6 1,385 15.0 1,534
6
0.125 19.6 1,995 21.7 2,209
7
0.170 26.6 2,715 29.5 3,007
8 0.221 34.8 3,547 38.5 3,928
9 0.280 44.0 4,489 48.7 4,971
10
0.346 54.3 5,542 60.2 6,137
11
0.419 65.8 6,706 72.8 7,426
12
0.498 78.2 7,981 86.6 8,838
13
0.585 91.8 9,367 101.7 10,372
14
0.678 106.5 10,863 117.9 12,029
16
0.886 139.1 14,189 154.0 15,712
18
1.121 176.1 17,958 195.0 19,885
20
1.384 217.4 22,170 240.7 24,550
22
1.675 263.0 26,826 291.2 29,705
24
1.993 313.0 31,925 346.6 35,352
26
2.339 367.3 37,467 406.8 41,489
30
3.114 489.1 49,883 541.5 55,237
32
3.543 556.4 56,756 616.2 62,848
34
4.000 628.2 64,072 695.6 70,950
36
4.484 704.2 71,831 779.8 79,542
38
4.996 784.7 80,034 868.9 88,626
40
5.536 869.4 88,681 962.8 98,200

en_USEnglish
滚动至顶部