3 Legs Wire Rope Slings

Ordering this product will provide you with three wire rope legs, suitable for heavier and larger lifting tasks. We can complete these slings in one of three ways. Either with soft eyes at each end, with hard/thimble eyes at each end (complete with a thimble end termination). You can also choose a master link at one end, and a hook at the other. Many combinations can be configured. We can produce any wire rope sling in any length too, so they will be purpose made to best suit your specific lifting operation.

This variety of endings allows our wire rope sling with three legs to be utilised in many different ways. If you would like to enquire which is the most suitable for your operation, then simply head to our contact details below.

Specifications

*Rated capacities are given in tons (2000lbs) using EIPS rope with IWRC

* Rated Capacities Basket Hitch based on D/d ratio of 25.
** Working Load Limit.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Sling angles less than 30° shall not be used.
Sling angles in this catalog depart from the traditional method of vertical angles measured at the sling hook. It has long been the opinion of sling users that it is easier to measure a sling angle relative to the ground or horizontal. The method is the same whichever angle is used. When the horizontal angle is used you, must use the trigonometric cosine of the vertical angle.