Description.
35X7 is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 32X7, 34X7 and 37X7. Depending upon your requirement for higher breaking load or better wear characteristics, these wire ropes are available in different finishes and lubrications as well as being available with plastic impregnated or in […]
Revolutionary design, high quality materials, and perfectly harmonised production processes – DEV TK16 combines all the characteristics needed for your application: Extremely resistant and best flexibility! Specifications 8 – 30mm: 16 x K6-EPIWRC (K), RCN 23-1 32 – 42mm: 16 x K7-EPIWRC (K), RCN 23-2 Ordinary lay or lang‘s lay, right or left lay Breaking Loads
DEV TK17 features – due to its structure – optimum all-round characteristics combined with extremely high breaking forces. EVOLUTION TK17 was designed specific ally for use in challenging multilayer spooling conditions, especially also for small drum diameters. Specifications 16 x K7-PIWRC (K), RCN 23-2 Lang‘s lay (also available as ordinary lay rope), right or left lay
The DEV TK 18 is our new high-performance rope for large cranes, e.g. in the offshore and shipping industry. EVOLUTION TK 18 has been developed for cranes which operate under hardest conditions. This rope offers best in class breaking forces, a high flexibility and is the first choice for larger diameters between 46 and 80 mm.
Rotation is a thing of the past, the future is PERFECTION TK15. Check out this ideal combination of exceptional torsional stability and high breaking forces, long service life and optimum winding behavior. Rotation resistant. Cost-effective. Safe. Specifications 16 x 7 – IWRC (K), RCN 23-2 Ordinary lay or lang’s lay, right or left lay Breaking
1×19 AISI316 stainless steel strand is a very popular stainless steel construction. Used heavily throughout the marine industry, 1×19’s excellent breaking load and low stretch characteristics along with its’ aesthetic appeal make it a favourite for marine, structural and balustrade applications as well as many others, examples of which are shown below: Applications Balustrades Standing
1×19 (12/6/1) – Marine Grade Stainless Steel Wire Rope Read More »
7×7 AISI316 stainless steel wire rope is used for a wide range of applications. More flexible than 1×19 but more rigid than 7×19, the 7×7 construction is often used where 1×19 lacks enough flexibility for an application or where 7×19’s weaker breaking load is too low for an application. Used extensively throughout the marine industry
7×7 (6/1) – Marine Grade Stainless Steel Wire Rope Read More »
6×36 is the most flexible of our stainless steel wire ropes. Available in much larger diameters, 6×36 stainless steel wire ropes are often used for larger diameter stainless steel slings as well as for general engineering applications. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the
6×36 (14/7+7/7/1) – IWRC Marine Grade Stainless Steel Wire Rope Read More »
7×19 AISI316 stainless steel wire rope is used for a wide range of applications. Extremely flexible when compared to both 1×19 and 7×7, the 7×19 construction is often used where a flexible stainless steel wire rope is particularly required. 7×19 performs well for running applications. Used extensively throughout the marine industry as well as for
7×19 (12/6/1) – Marine Grade Stainless Steel Wire Rope Read More »
1X19 AISI316 stainless steel strand is a very popular stainless steel construction. Used heavily throughout the marine industry, 1X19’s excellent breaking load and low stretch characteristics along with its aesthetic appeal makes it a favourite for marine, structural and balustrade applications as well as many others, examples of which are shown below: Applications Balustrades Standing
1X19 (12/6/1) Compacted Stainless Steel Wire Rope Read More »
18X7 AISI316 stainless steel wire rope is a non-rotating construction used where low rotation is required. Popular applications include davit and crane rope applications. Available in diameters from 1.5mm through to 16mm. Applications Marine crane rope applications Marine/Saltwater environment Sewage treatment works Wire rope slings Davit ropes Breaking Loads Nominal Diameter Approximate Mass Minimum breaking
18X7 (6/1) – Rotation Resistant Stainless Steel Wire Rope Read More »
Material:High-tensile stainless steel wire (inox) 1.4401 (AiSi 316) to DIN EN 10264-4(1.4436, 1.4462 on request) Modulus of Elasticity:130 kN/mm² ± 10 kN/mm² Tolerance on Diameter:0% / +3% Corrosion Protection:Stainless Steel (inox), no blocking compound Socketing:d=6-36mm: Swaging to German Technical Approval Z-14.7-431d=40-135mm: Spelter to DIN EN 13411-4 with Resin (e.g. WiRElocK®) Breaking Loads Nominal Diameter Minimum
English 
Spanish 
French 
German 
Italian 
Japanese 
Korean 
Arabic 
Russian 
Greek 
Croatian 
Dutch (Formal) 
Portuguese 
Dutch 
Urdu 
Czech 
Armenian 
Thai 
Romanian