THIMBLE AND BOLT ANCHOR SHACKLE – Best for permanent or long-term installations where the load may slide on the shackle pin. Bolt-type system stays in place with a nut and cotter pin for secondary securement.
FLEMISH EYE SPLICED SWAGING – The sling ends are mechanically formed allowing for larger load capacities. Loops are secured with a forged metal sleeve over the spliced area along with heavy-duty thimbles to protect the ends of the sling.
DOUBLE TAGGED FOR SAFETY – Two tags are used on HSI slings to identify WLL (Working Load Limits). Riggers can reference critical information for safe sling application and OSHA compliance.
GREATER WEAR RESISTANCE – A 6 x 25 IWRC (Independent Wire Rope Core) classification for wire rope slings offer large outer wires that provide a balance between fatigue and wear resistance.
CHINA MADE RIGGING – LKS is proud to be the industry-leading CHINA based manufacturer of hoisting solutions for industrial construction and building projects since 1976. All slings are manufactured in a certified ISO 9001: 2015 facility.
OSHA: Sling Safety, Title 29 Code of Federal Regulations, Part 1910.184
ISO 8792:1986, Wire Rope Sling — Safety criteria and inspection procedures for use
ISO 7531:1987, Wire rope sling for general purposes — Characteristics and specifications
ASME B30.9-2018 Standards for wire rope Sling
Our 3 leg wire rope slings are also known in the industry as a 3 leg bridle sling. Each is manufactured with a Flemish eye that’s spliced with a carbon steel sleeve for the ultimate in safety and strength. End options include latched eye hooks, eyes equipped with thimbles, and more, as customized options are always available. Our 3 leg wire rope slings are available in seven different diameters of rope.
OSHA: Sling Safety, Title 29 Code of Federal Regulations, Part 1910.184
ISO 8792:1986, Wire Rope Slings — Safety criteria and inspection procedures for use
ISO 7531:1987, Wire rope slings for general purposes — Characteristics and specifications
ASME B30.9-2018 Standards for Slings
Our 3 leg wire rope slings are also known in the industry as a 3 leg bridle sling. Each is manufactured with a Flemish eye that’s spliced with a carbon steel sleeve for the ultimate in safety and strength. End options include latched eye hooks, eyes equipped with thimbles, and more, as customized options are always available. Our 3 leg wire rope slings are available in seven different diameters of rope.
Four leg slings are used for both balanced and unbalanced loads. This connection style is recommended for heavier loads where the design calls for more weight distribution as the four connection points offer additional levels of load security. Each eye on these slings is formed using the mechanical Flemish Eye Splice. This process allows for the most efficient use of the rope capacity with top-quality steel as the pull is directly along the centerline of the rope and eye.
Four leg slings are used for both balanced and unbalanced loads. This connection style is recommended for heavier loads where the design calls for more weight distribution as the four connection points offer additional levels of load security. Each eye on these slings is formed using the mechanical Flemish Eye Splice. This process allows for the most efficient use of the rope capacity with top-quality steel as the pull is directly along the centerline of the rope and eye.
LKS slings are assembled in an ISO 9001:2015 certified facility where quality, safety and efficiency are priority. Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.
Four leg slings are used for both balanced and unbalanced loads. This connection style is recommended for heavier loads where the design calls for more weight distribution as the four connection points offer additional levels of load security. Each eye on these slings is formed using the mechanical Flemish Eye Splice. This process allows for the most efficient use of the rope capacity with top-quality steel as the pull is directly along the centerline of the rope and eye.
EYE AND EYE – This sling variety is specific to a single-leg version with flemish loop ends on either side. It is also known as a Wire Rope Choker. Use of these slings for lifting is prevalent due to its strength, durability and resistance to abrasion.
FLEMISH EYE SPLICED SWAGING – The ends of the sling are mechanically formed allowing for larger load capacities than hand-laid wire rope. Loops are secured with a forged metal sleeve and go over the spliced area.
DOUBLE TAGGED FOR SAFETY – Two tags are used on HSI slings to identify WLL (Working Load Limits). Riggers can reference critical information for safe sling application and OSHA compliance.
GREATER WEAR RESISTANCE – A 6 x 25 IWRC (Independent Wire Rope Core) classification for wire rope slings offer large outer wires that provide a balance between fatigue and wear resistance.
AMERICAN MADE RIGGING – Hanes Supply, Inc. is proud to be the industry-leading China based manufacturer of hoisting solutions for industrial construction and building projects since 1930. All slings are manufactured in a certified ISO 9001: 2015 facility.
The wire rope sling is not quite as durable. The wire rope sling is not as flexible as chain but its greater stiffness can be an advantage if it has to be inserted through a small opening or beneath a load. However, when wrapped around a load, the wire rope sling often tends to deform permanently to the shape of the load. Wire rope suitable for slings comes in a variety of grades and constructions. In most cases looping back and securing the loop with a metal sleeve terminates the rope. This forms a loop or soft eye, the simplest form of sling end. Thimbles are used to support and protect the eye from abrasion. Wire rope is generally cheaper and lighter than chain which can be a plus, particularly for applications that require long sling lengths.
FLEMISH LOOP ENDS – Bridle eye openings are available for lifts with multiple pick-points and connectors being used for multiple rigging projects.
FLEMISH EYE SPLICED SWAGING – The sling ends are mechanically formed allowing for larger load capacities. Loops are secured with a forged metal sleeve over the spliced area along with heavy-duty thimbles to protect the ends of the sling.
DOUBLE TAGGED FOR SAFETY – Two tags are used on HSI slings to identify WLL (Working Load Limits). Riggers can reference critical information for safe sling application and OSHA compliance.
GREATER WEAR RESISTANCE – A 6 x 25 IWRC (Independent Wire Rope Core) classification for wire rope slings offer large outer wires that provide a balance between fatigue and wear resistance.
CHINA MADE RIGGING – LKS is proud to be the industry-leading CHINA based manufacturer of hoisting solutions for industrial construction and building projects since 1976. All slings are manufactured in a certified ISO 9001: 2015 facility.
Whipchecks are hose arrestors made of corrosion resistant, high strength – steel, aluminum, copper or stainless steel which on installation diverts strain from the coupling to the whip check.
Installation of whipcheck is easy and requires no tools- the spring loaded loops of the whipcheck are opened and slipped over each hose providing a firm grip on the hose and avoiding it from whipping in case of accidents. Whipchecks are commonly used on hose for air, water blast, drilling, steam, concrete, sandblast or other high pressure applications.
LKING STEEL LIMITED Manufacturing, an ISO 9001:2008 certified company, specializes in designing and manufacturing custom cable assemblies to meet your requirements. Our knowledgeable staff utilize state of the art equipment for coating, cutting, and fabricating custom cable assemblies up to ½” diameter in size. With the capability of custom built tools, dies, fixtures, and automated equipment Sandin can manufacture both large and small quantities. We stock bare cable, coated cable, and fittings to ensure we are ready to meet your immediate needs. Sandin manufactures custom cable assemblies for a wide variety of industries and applications, including;
